Description
Features
- Designed for compatibility with both GP and EP flight
- Extremely lightweight lasercut allwood construction
- All hardware included
Product Information
This plane is a well designed for .91/15cc size trainer for beginner pilots. It has sturdy all balsa/ply wood construction and is very stable in flight. Bigger wing and bigger wing area helps give a more stable flight. 3 degree wing dihedral gives a good balance flight stability and agility. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation
What you need
- Engine. We recommend the OS Engines MAX 65AX (OSM16521)
- Servos. We recommend four Hitec HS-311 servos (HRC31311S)
- Battery. We recommend the Eneloop 2000mAh NiMH (5/HR-3UTG HMP-JR)
- Propeller. We recommend the APC 12×8 glow propeller (APCLP12080)
- Receiver. We recommend the Spektrum AR620 (SPMAR620)
- Radio. We recommend the Spektrum DX6e transmitter (SPMR6655)
Specs
- Length 1371mm (53.9 in)
- Flying weight 3500-4200 gr
- Wing area 50.5 dm2
- Wing loading 73g/dm2
- Wing type Naca airfoils
- Covering type V-kote film
- Spinner size Plastic 58mm (included)
- Radio 4 channel minimum (not included)
- Servo 5 standard servo2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
- Recommended receiver battery 4.8-6V / 800-1200mAh NiMH (not included)
- Servo mount 21mm x 42 mm
- Propeller suit with your engine
- Engine .91/15cc / 2-stroke (not included)
- Motor brushless out runner
- Experience level Beginner
- Plane type Trainer